SHP is a 1T2R MANET Mesh module launched by Zencheer Communication based on IEEE 802.11. It has the remarkable features of small size, light weight, and low power consumption. SHP has one transmit channel and two receive channels, and its size is only 59*88mm. It is suitable for handheld and unmanned devices, and can also be deployed in outdoor devices with lightning protection module and waterproof housing. In addition, SHP supports 2.4/5.8GHz dual-band WiFi, supports mobile phones, computers and other terminal devices to access the network through WiFi, and supports Beidou/GPS positioning (or TTL data serial port).
Key Features
- 1400MHz MANET Mesh supported
- 1T2R supported
- On board 2.4/5.8GHz WiFi
- GPS/BD or TTL supported
Product Status: Production
Operating Frequency | Mesh: 1400MHz (or customized) WiFi: 2.4/5.8GHz BD/GPS: 1559-1577MHz |
Channel Bandwidth | Mesh: 5/10/20MHz Adjustable WiFi: 20/40MHz Adjustable |
Output Power | Mesh: 30dBm WiFi: 23dBm |
Rx Sensitivity | Mesh: -96dBm@5MHz WiFi: -90dBm@20MHz |
Modulation | OFDM BPSK/QPSK/16-QAM/64-QAM |
Data Rate | Mesh: 40Mbps Max WiFi: 80Mbps Max |
Antenna | Mesh: 2 MMCX WiFi: 1 MMCX BD/GPS: 1 MMCX |
Ethernet | 2 10/100Mbps Ethernet Ports |
Other Interfaces | 1 USB Host 2.0 Interface 1 COM Port Tx Enable Rx Enable |
LED | 1 System LED |
Power Supply | 14-48V DC |
Power Consumption | 15W Max |
Physical Size | 59*88*11.1mm |
Temp Range | Storage : -40℃~+125℃ Operating: -20℃~+65℃ |
Weight | 104g |
Wired Network | IP address configurable Subnet mask configurable |
Mesh Features | Operating frequency adjustable Channel bandwidth adjustable Output power adjustable Distance optimization supported ESSID/BSSID configurable Encryption configurable (None/AES-CCMP) Up to 42 nodes supported 5 hops max for voice transmission 8 hops max for low speed data transmission |
Topology | Mesh node draggable Link quality display Route path display Nodes distance display |
Management | Web management supported (responsive layout) Import/export configuration file Factory reset Online firmware updating |
Coming soon...
NA